Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

6509 Module Question 1

Status
Not open for further replies.
Jan 7, 2011
66
US
I have a 6509 running IOS 12.1(27b)E4. I have installed a WS-X6148A-GE-45AF module. The module status shows unknown and the state is PwrDown. I cannot get this module to power up. I have 956.16 watts available and the hardware matrix shows this is compatible. Has anyone run into this before?

Jim Rapier
"Money can't buy happiness, but it can buy a big ass boat and you can sail right up to it." - Johnny Depp
 
I have a 6509 running IOS 12.1(27b)E4. I have installed a WS-X6148A-GE-45AF module. The module status shows unknown and the state is PwrDown. I cannot get this module to power up. I have 956.16 watts available and the hardware matrix shows this is compatible. Has anyone run into this before?

How old is the card?

I'd suspect this....

I know from experience that these cards are vulnerable

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
 
That sucks. Let's just say I was experiencing insufficient port density and eBay appeared to be the answer. We are a small business with no budget. That was a $100 boo-boo. I appreciate the insight.

Jim Rapier
"Money can't buy happiness, but it can buy a big ass boat and you can sail right up to it." - Johnny Depp
 
>We are a small business with no budget. That was a $100 boo-boo. I appreciate the insight

Don't despair. Cisco may/will replace that card with one without you having a contract... raise a supoport case direct with them

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
 
Main_Switch#sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SAL0704BYZD
2 0 Supervisor-Other Unknown Unknown
3 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC SAD043604AF
4 16 16 port GE RJ45 WS-X6316-GE-TX SAD04450PGF
5 16 16 port GE RJ45 WS-X6316-GE-TX SAD081509PT
6 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX SAL08496N1S
9 0 Unknown Unknown Unknown

Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0009.1245.5894 to 0009.1245.5895 4.1 7.1(1) 12.1(27b)E4 Ok
2 0000.0000.0000 to 0000.0000.0000 0.0 Unknown Unknown Unknown
3 0001.6412.d8b0 to 0001.6412.d8bf 1.2 5.4(2) 8.5(0.23)COS Ok
4 0030.9637.725c to 0030.9637.726b 1.1 5.4(2) 8.5(0.23)COS Ok
5 000f.f78a.1380 to 000f.f78a.138f 1.3 5.4(2) 8.5(0.23)COS Ok
6 0012.80ad.3950 to 0012.80ad.397f 6.1 7.2(1) 8.5(0.23)COS Ok
9 0000.0000.0000 to 0000.0000.0000 0.0 Unknown Unknown PwrDown

Mod Sub-Module Model Serial Hw Status
--- --------------------------- --------------- --------------- ------- -------
1 Policy Feature Card 2 WS-F6K-PFC2 SAL0703BVMJ 3.3 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL0703BWGX 2.5 Ok
6 Cisco Voice Daughter Card WS-F6K-VPWR-GE SAL08496Q9H 1.1 Ok

Mod Online Diag Status
--- -------------------
1 Pass
2 Unknown
3 Pass
4 Pass
5 Pass
6 Pass
9 Unknown
Main_Switch#

That is what I am looking at. Is there a command that I am unaware of other than module power?

Jim Rapier
"Money can't buy happiness, but it can buy a big ass boat and you can sail right up to it." - Johnny Depp
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top