61C ,Out going CLID issue on new PRI-link

[sabirawan]

Hi ,
i have 61C , already one PRI- from CO working fine with aspect to CLI for out going calls , that DID no plus 000 is showing on reception end.
When i added another PRI which is GSM PRI from one of GSM vendor having SIEMENS system at back end , i am not able to show the Digits that the DID No and the 000,
in CLID entry 0 is defined for CO PRI ,
1 is defined for GSM PRI ,
also i worked on GSM PRI Route by keeping CPFXO No and put the required entries ,
Any body who worked on NORTEL & SIEMENS GSM side had/have any solution.

The prints are like this

CLID
ENTRY 0
HNTN 20
ESA_HLCL 6554
ESA_INHN NO
ESA_APDN YES
HLCL 6554
DIDN YES
HLOC
LSC
CLASS_FMT DN

ENTRY 1
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 0956092000
DIDN NO
HLOC
LSC
CLASS_FMT DN


ROUT 9
DES GSM ISDN
TKTP DID
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI2
ISDN YES
MODE PRA
IFC EURO
CNTY ETSI
SBN NO
PNI 00000
NCNA NO
NCRD NO
ISAR NO
CPFXS No
HNTN xxxx
HLCL xxxx
SDID YES
CTON LOCL
DAPC NO
INTC NO
DSEL VOD
PTYP DCO
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
RANX NO
SRCH RRB
TRMB YES
STEP
ACOD 51
TCPP NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC YES
DCNO 5 *
NDNO 5
DEXT NO
DNAM NO
MFC NO
ICIS YES
OGIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096

 

[johnpoole]

so neither clid entry works on new ckt, they both work on the old?

ld 96
enl msgo x on the d of your new ckt.. my money would be on your sending and the carrier is ignoring that field

john poole
bellsouth business
columbia,sc

 

[sabirawan]

Johnpool,
I had have already enl msgo and msgi , and i am getting all that what i put in rout
CPFXS NO
HLCL 0956092000
but at the receiving end only 0956092 appears , and 000 does not appeared. also let me tell you that 0956092 is the GSM DID Number , and customer wants to have their ID as 000 attached to this DID number.

 

[johnpoole]

your carrier has to make a software change to allow the additional digits.. i work stateside, we have two carriers, one shows any 10 digits i send, the other will only show one of 4 clids only.. both use a dms switch..


there is not a place in our box to send unique cluds per route, since one route is right.. the trouble has to lie with the carrier

john poole
bellsouth business
columbia,sc