6 Port Combo Fiber Expansion Card

[salo0920]

Having not done this before, I ask the basic questions

1) When using just a single 6 port combo expansion card with no other 6 port cards (either combo or expansion) does it go in the slot on the left (where the services card would go) or on the right (where the first expansion card would normally go?

2) When using 2 expansion cards (as in XC) when one of them is a combo card, which card goes where, or doee it matter?

 

[curlycord]

Start at the right slot, combo I believe in right also when 2 cards but it may not matter.

http://www.spoctel.com

 

[executone]

Curly is correct. Start on the right. It does not matter on which card is on right if XC, but I was told that you should put 2 combo cards in if planning to build a full-blown MICS system.

In the reference manual it tells you where cards are to be placed and when you really need the extra DTMF as on the combo cards.

Good Luck!!