Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

6.1MR PRI, got to be Telco, right?

Status
Not open for further replies.

jjjohn

Vendor
Jun 29, 2005
109
US
MICS 6.1 MR
New PRI circuit, inbound DID calls fine, toll free calls fine, 1+ long distance calls fine BUT 10 digit local dialing, get a "Call cannot be completed as dialed", tried 7 digit & 1+ 10 digit local number will not complete.
There are 2 local area codes, 1 area code I am able to dial all 10 digits before telco recording but the 2nd area code only allows 7 or 8 digits before "Call cannot be completed as dialed"
Got to be telco, right?
 
Check your dialing plan, change your two local area codes to 10 digit instead of 3 which is default.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top