Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

6.1 micro modem

Status
Not open for further replies.
fadge

fadge

Technical User
Joined
Apr 8, 2009
Messages
7
Location
GB
I posted this yesterday but it seems to have vanished!

How do you set up a 6.1 micro to use the modem when there is no modem card. I have done this in the past but just cannot remember how I did it.

Thanks

Fadge
 
Sort by date Sort by votes
after digging through my course note I found the answer. For those who are interested, you just create a new extension on port 013201.
 
Upvote 0 Downvote
The modem is on the CNIU slot02, if you list all xtn channels (LCH A) you should get one the lists as 0132xx, as the micro has only 14 slots dont start looking for the extra cabinet... 013201 should be the modem, the number/TAC/COS can be changed as a normal xtn.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Steve5512
  • Locked
  • Question Question
HiPath DX150E Modem programming
Replies
5
Views
745
Steve5512
Steve5512
dazzzzzzzzzz
  • Locked
  • Question Question
isdx micro wall bracket
Replies
0
Views
171
dazzzzzzzzzz
dazzzzzzzzzz
joehawkins
  • Locked
  • Question Question
ISDX Micro
Replies
1
Views
224
dark5tar
dark5tar
robbclaxton
  • Locked
  • Question Question
Realitis 6.1 Command Manual
Replies
2
Views
240
CRM026
CRM026
roachg
  • Locked
  • Question Question
Does ISDX 6.1 support flexible slots ?
Replies
1
Views
261
iSDX
iSDX

Part and Inventory Search

Sponsor

Back
Top