Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

56K Line

Status
Not open for further replies.

telone

Vendor
Nov 28, 2003
6
0
0
US
Having Trouble Extending 56K Line From Mux With RJ11 Connection Out To Field
What Is The Pin Out ????
 
Tip and ring---is it a 4 or 6 pin rj11? No matter--tip and ring will be on the two center pins 2 & 3 or 3 & 6
 
extend the circuit just like you were running a data cable. it will extend all 8 wires in a straight through configuration. Furbal is sort of right but a 56k line is an RJ48. RJ stands for registered jack which is defined by the circuit it is connected to. Everyone uses RJ45 to define an 8 conductor jack or plug but that is actually an improper use. and yes, a 56K uses 1,2 and 7,8 or blue orange and brown slate/white
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top