Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

5610

Status
Not open for further replies.

Tech123456789

Technical User
Dec 5, 2005
7
AU
Hi,

I have IP406 and 5610 in remote location . Two locations are connected through IPSec tunnel using Billion router at both end ( BIPAC-741 GE V2 ADSL Firewall Router).

From remote location I can able to ping Manager PC but not IP-406.

I have created IP Route in Manager.
Firewall is disable in Router.

Like cisco router ( no fixup command) is there any command for above router.

Any help ??

Thanks
Ramesh.
 
Sounds like you don't have the right ip route in the IPO

For a default route leave the ip address and subnet blank, put the router ip address in the gateway and set the destination LAN1

Is the IPO in the trusted address range of the vpn tunnel ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top