5610 Sets

[Labash]

Cannot get a 5610 set to work on our IP Office.
The display reads;
1007: NoUser B
1503

If I hit numbers on the keypad it says incompatible disk.

Is DHCP automatically turned on in IP Office?

 

[TomMills]

you need to log it in.

http://www.twitter.com/tem1985

 

[Bas1234]

Press mute, logoff (564633) #
Then enter the number you would like the phone to have press # enter password (if it has one) then # again.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[Labash]

Thanks guys.
Where would I find the password.
Is it system or set based?

 

[VanZenden]

password is set in Login Code, under User > Telephony > Supervisor Settings

 

[Bas1234]

@vanzenden, that only when he uses Hotdesking, if not the then remove or enter a new password just below the user twice.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________