hi all
Im taking ccna 4 the isdn chapter and we are trying to configure a 550 adtran... so when i activate the int bri 0/0 and i type the command show isdn status thats what i get..
ISDN BRI0/0 interface
dsl 0, interface ISDN Switchtype = basic-ni
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated
TEI Not Assigned, ces = 1, state = 1(terminal down)
spid1 configured, spid1 NOT sent, spid1 NOT valid
TEI Not Assigned, ces = 2, state = 1(terminal down)
spid2 configured, spid2 NOT sent, spid2 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Number of L2 Discards = 0, L2 Session ID = 0
Total Allocated ISDN CCBs = 0
the layer 1 status should be activated..i dont know why its always deactivated..please somebody help me with this...thanks
Im taking ccna 4 the isdn chapter and we are trying to configure a 550 adtran... so when i activate the int bri 0/0 and i type the command show isdn status thats what i get..
ISDN BRI0/0 interface
dsl 0, interface ISDN Switchtype = basic-ni
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated
TEI Not Assigned, ces = 1, state = 1(terminal down)
spid1 configured, spid1 NOT sent, spid1 NOT valid
TEI Not Assigned, ces = 2, state = 1(terminal down)
spid2 configured, spid2 NOT sent, spid2 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Number of L2 Discards = 0, L2 Session ID = 0
Total Allocated ISDN CCBs = 0
the layer 1 status should be activated..i dont know why its always deactivated..please somebody help me with this...thanks