Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
5340 on ICP3300 V7.0 gives just 24 buttons
- Thread starter slapin
- Start date
T8keiteasy
IS-IT--Management
Yop, 7.1.5.132 corrects this problem..
But what is the service pack ???
:-o
Now, it's about French users too !!!
But what is the service pack ???
:-o
Now, it's about French users too !!!
The SP1 service pack is on Mitel's website on the same page as 7.1.5.13.
The readme file (included in download) tells you what to do
*******************************************************
If we don't take care of the customer, Maybe they'll stop bugging us.
The readme file (included in download) tells you what to do
*******************************************************
If we don't take care of the customer, Maybe they'll stop bugging us.
- Thread starter
- #5
cant make sense of the email address.
Here is a copy of the Readme file
This patch can be applied on 7.1.5.13
Dpar to be solved
call control fix ( 37.1.5.12_sp1)
p.175664 Problem with hybrid x-nett
p.178483 DPNSS calls from Sopho are ignored
p.179674 Frequent bgrpmgr stack overflows running MiTAI test suite
p.182317 ss4hdlr stack overflow causes system reset
p.183884 Call history does not follow ARS correctly
Set firmware fix for 5330-5340 ( version 1.1.1.10)
p.184095 5340 ignores CDP after 7.1.5.13
p.179572 experencing back ground static with 5340 Ip set when in different compression zone
p.180717 provide a safe recovery mechansism when flash is corrupted.
File included in 7.1.5.13_sp1.zip ( call control version is 37.1.5.12_sp1)
-relink.run
-_ccpatchrevs
-MinetIP5340.bin
-L2boot_5340.bin
-bootip5340.bin
-readme.txt for instruction
Note: The offical fix is in 7.1 UR3
Step 1: Unzip 7.1.5.13_sp1.zip and save all of above files on your PC (say patch folder c:\patch)
Step 2: Apply the patch as follows:
On your PC, change to the directory that contains file in step 1
e.g cd c:\patch
Then type the following:
Type: Ftp <ip address of the controller>
Enter ESM username/password to log in
Type: binary
Type: hash
Type: cd /db
Type: put _ccpatchrevs
Type: put relink.run
Type: cd /sysro/tftp
Type: ren bootip5340.bin bootip5340.org
Type: ren Minetip5340.bin Minetip5340.org
Type: ren L2boot_5340.bin L2boot_5340.org
Type: put bootip5340.bin
Type: put Minetip5340.bin
Type: put L2boot_5340.bin
Type: bye
Step 3: Reboot the controller.
Step 4:To ensure all 5330_5340 IP phone upgraded, issue using "load Ipdevice.."command from ESM maintenance.
Note: pls refer ESM help for the command syntax
*******************************************************
If we don't take care of the customer, Maybe they'll stop bugging us.
Here is a copy of the Readme file
This patch can be applied on 7.1.5.13
Dpar to be solved
call control fix ( 37.1.5.12_sp1)
p.175664 Problem with hybrid x-nett
p.178483 DPNSS calls from Sopho are ignored
p.179674 Frequent bgrpmgr stack overflows running MiTAI test suite
p.182317 ss4hdlr stack overflow causes system reset
p.183884 Call history does not follow ARS correctly
Set firmware fix for 5330-5340 ( version 1.1.1.10)
p.184095 5340 ignores CDP after 7.1.5.13
p.179572 experencing back ground static with 5340 Ip set when in different compression zone
p.180717 provide a safe recovery mechansism when flash is corrupted.
File included in 7.1.5.13_sp1.zip ( call control version is 37.1.5.12_sp1)
-relink.run
-_ccpatchrevs
-MinetIP5340.bin
-L2boot_5340.bin
-bootip5340.bin
-readme.txt for instruction
Note: The offical fix is in 7.1 UR3
Step 1: Unzip 7.1.5.13_sp1.zip and save all of above files on your PC (say patch folder c:\patch)
Step 2: Apply the patch as follows:
On your PC, change to the directory that contains file in step 1
e.g cd c:\patch
Then type the following:
Type: Ftp <ip address of the controller>
Enter ESM username/password to log in
Type: binary
Type: hash
Type: cd /db
Type: put _ccpatchrevs
Type: put relink.run
Type: cd /sysro/tftp
Type: ren bootip5340.bin bootip5340.org
Type: ren Minetip5340.bin Minetip5340.org
Type: ren L2boot_5340.bin L2boot_5340.org
Type: put bootip5340.bin
Type: put Minetip5340.bin
Type: put L2boot_5340.bin
Type: bye
Step 3: Reboot the controller.
Step 4:To ensure all 5330_5340 IP phone upgraded, issue using "load Ipdevice.."command from ESM maintenance.
Note: pls refer ESM help for the command syntax
*******************************************************
If we don't take care of the customer, Maybe they'll stop bugging us.
- Status
Similar threads