5330e and 5340e Web GUI

[Commwell]

Have been into a Mitel 5330e phone before, by setting SIP mode , identifying the IP and browsing to it. Have read all of the dead-end posts, except for one that states they found the magic .bin file to enable the web interface. (sip5340ttnlang_en_US.bin). I have looked MOL in IP endpoints software and 3300, MiVo250, cannot find it. Need to load it onto the TFTP server or is there a magic flip, such as port number or / user or /admin to get into these?
Have a site that TFTP is used for medical equipment and I need to re-point these phones to a new proxy. Any help would be appreciated!

if you haven't failed at some point, you're not trying...

 

[Billz66]

try this

https://drive.google.com/file/d/14qC_ETB3K5osZXdA-m11z7AzlUUldRjv/view?usp=sharing

If I never did anything I'd never done before , I'd never do anything.....

 

[Commwell]

Thanks, I'll give it a shot

if you haven't failed at some point, you're not trying...

 

[Commwell]

Not seeing the 5330e reach out to the server, manually configured TFTP address under network IPV4 parms. Went back and changed manual update, confirmed. No activity to the server. Out of curiosity, I changed the phone to Minet, and saw this on the TFTP log viewer:
Connection received from 10.51.71.109 on port 49157 [22/02 16:49:46.958]
Read request for file <MainIp5340e.bin>. Mode octet [22/02 16:49:46.961]
File <MainIp5340e.bin> : error 2 in system call CreateFile The system cannot find the file specified. [22/02 16:49:46.962]
Connection received from 10.51.71.109 on port 49158 [22/02 16:49:50.035]
Read request for file <DectCordlessModule.bin>. Mode octet [22/02 16:49:50.037]
File <DectCordlessModule.bin> : error 2 in system call CreateFile The system cannot find the file specified. [22/02 16:49:50.038]
So I changed the filename of sip5340... to MainIp5340e.bin, same result.
Suggestion? (Tried Solarwinds as well as Tftpd64 as a server (Have used both in the past)

If you haven't failed at some point, you're not trying...

 

[Billz66]

what exactly are you trying to do ?
if its change the phone into sip mode , pretty sure that has to be done manually from phone

If I never did anything I'd never done before , I'd never do anything.....

 

[Commwell]

I put it into SIP using the phone boot menu. Trying to web into it in order to put in the credentials and target for a SIP server

If you haven't failed at some point, you're not trying...