5310 Conference Saucer - Maximum cable length?

[Billz66]

MCD 5.0 SP1 PR1
5310 confeernce dish connected to 5360 handset

-customer wants to have the dish further away from the phone , Does anyone know if the max cable length is documented?

I have suggested to the slaes guy that Mitel would probably only support it on the supplied cable but it may work on say a 10 m patch lead .
- if there were any audio issues they would have to remove the long lead , replace the short one and if teh problem dissapeard then thats that.

If I never did anything I'd never done before , I'd never do anything.....

 

[benny89]

I got one to work over about 90m of Cat6 cable. The saucer is connected through a floor box under the boardroom table. The cable is then looped through to the cabinet 40m away and back to an outlet in a cupboard in the boardroom. The call quality was the same. I know it works fine but I don’t know if mitel will support it if it doesn’t work.

 

[LoopyLou]

They won't

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.