junglebunny
Technical User
I have recently obtained a 5114vu motherboard - but do not know how to set up the pins for the LEDs/Reset & Power buttons. Can anybody help me please?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
5114vu motherboard
- Thread starter junglebunny
- Start date
- Status
Jakespeare
Vendor
GOOGLE SEARCH:
> Search term(s)
5114vu motherboard
19 Hits. If you sort through those you may find a lead.
* Try to find a MANUAL for that mainboard that you can download.
** ALSO: On almost ALL mainboards there is the information written on the mainboard, by the pins, that shows the
location / directions about External / Front case / Lights hook ups.
You have to look carefully. If your a pro, you can almost figure it out with that kind of limited help. If your a novice it can be a REAL challenge,,,,,,
So, I recommend you get the manual,,,,, and hopefully you can find one online to download.
Good luck.
> Search term(s)
5114vu motherboard
19 Hits. If you sort through those you may find a lead.
* Try to find a MANUAL for that mainboard that you can download.
** ALSO: On almost ALL mainboards there is the information written on the mainboard, by the pins, that shows the
location / directions about External / Front case / Lights hook ups.
You have to look carefully. If your a pro, you can almost figure it out with that kind of limited help. If your a novice it can be a REAL challenge,,,,,,
So, I recommend you get the manual,,,,, and hopefully you can find one online to download.
Good luck.
Here's two sites that I found helpful
5114vu Mitac Motherboard sites
5114vu Mitac Motherboard sites
- Status
Similar threads
- Locked
- Question
- Locked
- Question