5000HX and CallerID with SIP trunks...

[swalker48329]

I have a Mitel 5000HX with 12 SIP licenses. We have several DID's with Voip.MS. We would like the "Calling Party Number" to change based on the areacode we are calling.

Example ;

We dial 248 area code, we would like our 248-XXX-XXXX phone number to populate the outgoing caller ID
We dial 302 area code, we would like our 302-XXX-XXXX phone number to populate the outgoing caller ID
We dial 301 area code, we would like our 301-XXX-XXXX phone number to populate the outgoing caller ID

Any suggestions?

Thanks
Shane Walker

 

[619Tech]

Possibly via (3) different SIP trunk groups each having their own "Calling Party" area code. Not sure if you can have three different connections to the same carrier or if the SIP licensing is dynamic (pooled). ARS could be setup to use the appropriate Trunk Group for calling that area code. Sounds like a tough one. Can the carrier possibly help with some "Calling Party" number substitution for the calls going to those area codes? You also need DID's in each area code for SIP to use those for Caller ID.

 

[swalker48329]

SIP license is NOT pooled, and you cant use same IP in 2 different trunks

I could create domains names that resolve to the same IP, that may work, but would require SIP license(s) per trunk.

We have the DID's, and for now thats the only workaround I can think of to get it working. anyone got a SIP license crack? lol

Shane