5000 error log info

[MagicDaveUK]

Hi, had a customers 5000 go down last week and after a while came back up. The customer said he had a problem with a switch and it brought down a lot of other things on his network, but when he rebooted the 5000 as a stand alone system it still had problems. below is a copy of the error logs and i was hoping some one could explain the M999 errors and the system reset type + code change.

Jun 20 15:30:51 CS5200-COLCHEST CP[1513]: System Reset Type = 'Code Change'
Jun 20 15:30:58 CS5200-COLCHEST DEI[1631]: M999 dei: 5.1.20

Jun 20 15:31:01 CS5200-COLCHEST DEI[1660]: M999 update_dei: 5.1.20

Jun 20 15:31:05 CS5200-COLCHEST DEI[1660]: M999 update_dei: FPGA build DATE:10-16-08,1

Jun 20 15:31:55 CS5200-COLCHEST CP[1513]: A000 ALARM Alarm Automatically Cleared

Jun 20 15:32:40 CS5200-COLCHEST CP[1860]: System Reset Type = 'Database Restore Complete'

Jun 20 15:35:44 CS5200-COLCHEST DEI[1974]: M999 dei: 5.1.20

Jun 20 15:35:46 CS5200-COLCHEST DEI[1990]: M999 update_dei: 5.1.20

Jun 20 15:35:49 CS5200-COLCHEST DEI[1990]: M999 update_dei: FPGA build DATE:10-16-08,1

Jun 20 15:35:53 CS5200-COLCHEST DEI[2044]: M999 update_dei: 5.1.20

Jun 20 15:35:55 CS5200-COLCHEST CP[1860]: A114 ALARM Dual T1/E1/PRI Module (T1M-2) 1 Port 1 In Red Alarm

Jun 20 15:45:18 CS5200-COLCHEST CP[1860]: Alarm 114 Automatically Cleared

Cheers