500/2500 set dial tone time-out 1

[BobFroeh]

Is there a setting that will allow a analog port to provide a longer dial tone in between dialing. What I have is a data labs voice mail (4 port) that takes to long to pulse out once dial tone is received. I tried changing TIM in LD15 LDTT but it seems like it still times out in about 6-8 sec. Any ideas??

 

[GHTROUT]

The LDTT Timers go to 30 seconds. You do mean "Disconnect Tone" correct?

CLS LDTA: The called 500 set emits this tone when someone hangs up on it.



~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]

 

[PERRYPJ]

Check the timers in your RDB EOD and ODT, but these are SYSTEMWIDE

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[GHTROUT]

They have nothing to do with analog TN dial tone, so don't spend any time changing them.

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]

 

[PERRYPJ]

If it's the time it takes before you actually start dialing there in LD 15 under TIMERS (DIDT) default is 14

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[GHTROUT]

Now THATS a winner

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]

 

[BobFroeh]

Thanks guys will give DIDT a go...