50/60 Hz Clock Inaccuracies 1

[HtownMack]

System G3R V7-

It seems all the clock displays on my 6408D+ phones tend to loose time. Users constantly have to resynchronize with the date-time soft key. I'm using a 6416D+ and have never had this problem. We are in a foreign country that uses 220v@50Hz. Anyone have any suggestions?

 

[ph0neguy]

What type of tone clock do you have in the switch, "list configuration control" will show you if you didn't know already.

 

[HtownMack]

ph0neguy,

It's a TN 2182B. We're using 220v @ 50hz out here in Kosovo though.

 

[orypecos]

Have u done "change system features" and do "time update" " yes"?

 

[ph0neguy]

do you have more than one port network in this configuration?

 

[HtownMack]

orypecos , what page is the "time update" 1-10?
ph0neguy, yes I believe so.

 

[orypecos]

Page 7 but the page is different depending on the system.
"System Updates Time On Station Displays? n"
The power shouldn't matter, I don't believe, cause the ac power is converted to dc and then the dc is supplied to a oscillator that actually determines the clock time.

"change system-parameters features Page 7 of 10
FEATURE-RELATED SYSTEM PARAMETERS
Pull Transfer: n Update Transferred Ring Pattern? n
Outpulse Without Tone? y Wait Answer Supervision Timer? n
Misoperation Alerting? n Repetitive Call Waiting Tone? y
Allow Conference via Flash? y Repetitive Call Waiting Interval (sec): _
Vector Disconnect Timer (min): __ Network Feedback During Tone Detection? y
Hear Zip Tone Following VOA ? y System Updates Time On Station Displays? n

 

[HtownMack]

Here's my page 7:

FEATURE-RELATED SYSTEM PARAMETERS

Pull Transfer: n Update Transferred Ring Pattern? n
Outpulse Without Tone? y Wait Answer Supervision Timer? n
Misoperation Alerting? n Repetitive Call Waiting Tone? n
Allow Conference via Flash? y
Vector Disconnect Timer (min): Network Feedback During Tone Detection? y
System Updates Time On Station Displays? n
Intercept Treatment On Failed Trunk Transfers? n
Station Tone Forward Disconnect: silence
Level Of Tone Detection: precise
Charge Display Update Frequency (seconds): 30
Date Format on 6400 Terminals: mm/dd/yy
On-hook Dialing on 6400/8400 Terminals? y
RECALL TIMING
Flashhook Interval? y Upper Bound (msec): 1000
Lower Bound (msec): 200
Forward Disconnect Timer (msec): 600
ITALIAN DCS PROTOCOL
Italian Protocol Enabled? n

 

[orypecos]

hmmm.... maybe not a option on the V7?

 

[4merAvaya]

Change this entry on page 7:

System Updates Time On Station Displays? n

Kevin

 

[HtownMack]

Thanks 4merAvaya. I always thought I was blind.

 

[orypecos]

duhhh, I du believe that is what I said before!!?????
;-P
Well anywho.... did it make the phones have the right time?