nanningmiss
Technical User
Thanks all!
We want to install paging on a site without a PBX. So we want to connect the paging to an Algo 4900 ATA, then to the USB port of a 1120 or 1140 phone.
The ATA works well when connected to a 2050 softphone, but doesn't work to a 1100 phone. As some old posts suggests, I go get a powered USB hub. Currently, when I double-click "services" key, then "Local Diagnostics" -- "USB Devices", I can see "Nortel Networks/USB Telephone Set" at one USB port. However, the analog phone connected to the ATA doesn't work!!
The firmware of our 1100 series phones is 0624C6O (1120) or 0625C6O (1140). It should be UNIStim3.2, which meets the minimum requirement (UNIStim3.1).
Any thought to get this analog phone work?
Thanks so much!!
We want to install paging on a site without a PBX. So we want to connect the paging to an Algo 4900 ATA, then to the USB port of a 1120 or 1140 phone.
The ATA works well when connected to a 2050 softphone, but doesn't work to a 1100 phone. As some old posts suggests, I go get a powered USB hub. Currently, when I double-click "services" key, then "Local Diagnostics" -- "USB Devices", I can see "Nortel Networks/USB Telephone Set" at one USB port. However, the analog phone connected to the ATA doesn't work!!
The firmware of our 1100 series phones is 0624C6O (1120) or 0625C6O (1140). It should be UNIStim3.2, which meets the minimum requirement (UNIStim3.1).
Any thought to get this analog phone work?
Thanks so much!!
