cyberspace
Technical User
Does anybody have a sample of a working QoS policy for their Voice VLAN on a 4800G?
I have my port set up as follows:
interface GigabitEthernet1/0/1
port link-type hybrid
port hybrid vlan 7 tagged
port hybrid vlan 1 untagged
undo voice vlan mode auto
voice vlan 7 enable
broadcast-suppression pps 500
undo jumboframe enable
poe enable
stp edged-port enable
Now, on the 5500, there was a default QoS policy already present on the switch, which was automatically applied to all ports and prioritised voice traffic automatically.
The 4800G documentation says that when you create a manual voice vlan, QoS is applied, but I cannot see QoS in the config.
I thought I would try to recreate the ACL's and QoS policy of the 5500...
The ACLs work OK but "qos-profile" is no longer valid.
Any help appreciated
'When all else fails.......read the manual'
I have my port set up as follows:
interface GigabitEthernet1/0/1
port link-type hybrid
port hybrid vlan 7 tagged
port hybrid vlan 1 untagged
undo voice vlan mode auto
voice vlan 7 enable
broadcast-suppression pps 500
undo jumboframe enable
poe enable
stp edged-port enable
Now, on the 5500, there was a default QoS policy already present on the switch, which was automatically applied to all ports and prioritised voice traffic automatically.
The 4800G documentation says that when you create a manual voice vlan, QoS is applied, but I cannot see QoS in the config.
I thought I would try to recreate the ACL's and QoS policy of the 5500...
The ACLs work OK but "qos-profile" is no longer valid.
Any help appreciated
'When all else fails.......read the manual'