Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
48 Cap Module Programming Question
- Thread starter whender
- Start date
curlycord
Programmer
- Thread starter
- #3
Multimedium
Programmer
Actually, you can change button assignments on a Key Lamp Module (KLM) in programming.
But, to do so, the M7324 attached to the KLM must have been designated as a Central Answering Position (CAP): System Programming > CAP Assignment.
Once this is done, you might need to exit and re-enter programming. Then, all you have to do is browse to Terminals & Sets > [Set] > User Preferences > Button Programming and press the CAP1 softkey.
But, to do so, the M7324 attached to the KLM must have been designated as a Central Answering Position (CAP): System Programming > CAP Assignment.
Once this is done, you might need to exit and re-enter programming. Then, all you have to do is browse to Terminals & Sets > [Set] > User Preferences > Button Programming and press the CAP1 softkey.
- Status