46xxsettings.and J100 Series Phones

[BrianCosta]

Hello ...

I have IPOSE 11.1.3.1 build 34.
I have some questions about the 46xxsettings file when applied to J100series.

1. VLAN ID.
The IPOSE IP is : 10.200.88.25
The IP Phones Range is : 172.19.3.x
The VLAN ID is : 56
When Powered on the Phones for the first time, So when I logged into the phone to program it, I noticed that it was pulling VLAN
ID from the client’s network. I set a static IP for it, as well as an HTTP and HTTPS, and then I restarted it.
on the first restart, the phone ping well, on the second restart, the ping is time out, and the phone is acquiring service, when
I check this, I found that the phone is lost the VLAN ID.
when I configure the phone without VLAN ID with the same IPOSE IP, the phones is updated well and connected, back it again to the
customer IP value, this time the VLAN is working well and not disappear or lost and the phone is working well.
what should I do to be the phone worked from the first time.

2. TLS.
on IPOSE, I checked TLS with port 5081.
on 46xxsettings, I set SET TLSSRVRID 0. set AUTH 0
the phone is acquiring service, back to TCP, the phone is working.

3. Background and Screen Server.
I set background and screen server on 46xxspecials, when i use it, he SIP working as SIP standard, when remove it the phone
working normal as SIP feature.


Thanks in Advance