46XX Mute commands on the phones 1

[cotconat]

I am looking for a document that shows all the different commands you can issue from a 46XX phone. Things like the mute 73738 # AKA mute reset #

 

[simreal]

Invocation Mnemonic Procedure Restrictions
<Mute> 2337# ADDR IP ADDRess programming
<Mute> 8439# VIEW VIEW Phone Values & FW file versions
<Mute> 767# QOS Quality Of Service Values AKA 802.1p/q
<Mute> 7766# SSON Site-Specific Option No. (176=Default)
INTerface enable/Disable for Hub & IrDA
<Mute> 73738# RESET RESET phone or to defaults
<Mute> 8378# TEST Initiate a self-TEST (# to Quit)
<Mute> 564633# LOGOFF LOGOFF an IP from Communications Manager/Definity Only R1.5 and later
<Mute> 242# AGC Automatic Gain Control Only 1.7 and later
<Mute> 284# CTI Enables/disables the Softphone CTI connection. Only 1.7 and later
<Mute> 5264# LANG LANGuage option - 4620 Only! Only 4620 1.72 and later
<Mute> 468# INT Allows you to set the speed and duplex.  Not recommend. Only 4630SW, 4610SW, 4620SW, 4620 R1.8 and later
<Mute> 47687# GROUP allows you to set a GROUP Option that can be testing in the 46xxsetting.txt file. This is useful if you want a particular group of telephones to have a unique settings. Only in 2.0 and later

Pressing <Mute/Hold> & <Trnsfr> Together also tests set

Tips: <Mute> & <Hold> buttons can both be used interchangeably
Some Models only have <Hold> on the screen, so only <Mute> is available when phone is booting, so <Mute> is perfered.

 

[cotconat]

Thanks simreal did you find these in a document if so which one?

 

[simreal]

Actually no. I had these in a word doc from my Avaya days.

I used to work at Avaya in the TSO in Denver. This is just one of the "cheat sheets" I used to keep handy.