We currently have a trial site with 40+ IP4602's
we have 1 minor problem but suspect this is probably due to the version of firmware we are being forced to run on this site
Is it possible to programme any of the keys on the 4602 with IPOffice, maybe the display softkeys. e.g. I would like to have forward unconditional and pickupmember functions. They would only need to be available when the phone is not on a call.
What is normally displayed by the two display keys?
i believe hat the 2 soft keys can be programmed by the useres digital telephony tab, I cant remember the defaults but I suspect you will find that they are call apperance keys
In conjunction with IP Office 1.3 software, the following hardware is now supported:
• IP412 control unit plus the following supporting modules:
• Dual E1 and Dual T1 modules.
• E1-R2 Line Modules
• ATM4 EN, ATM16 EN, ATM4 NZ and ATM16 NZ Line Modules.
• 4602 telephone.
This is from the release notes 1.3 or greater
Key programing
The A B keys relate to digital telephoney 1 and 2 in the user tab.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.