4550 white lines down page

[RANDYWYSE]

when printing config page, white lines go down page in
a collum like as if you took your fingers and ran them
down the page before it ran through the fuser.the itb and
the drawer has been changed and the drum kit.this happens before the page gets to the fuser. it does show up on the itb during half print test.all print$ and colors are affected.other wise it works ok
help me please!!!

 

[gunthnp]

tranfer belt maybe

gunthnp

 

[RANDYWYSE]

im going to check the scanner mirror
thanks gunthmn
i replaced the transfer belt but no help
randy

 

[Jomama46]

Check the slit glass, this is where the laser beam and drum meet. If the glass is dirty (or otherwise blocking the beam)the image on the drum, in that area, will not be discharged and therefore not attact toner.
HTH

Jomama

 

[RANDYWYSE]

thankx jomama
you got it
i found tomer on the mirror
the customer used air spray at the
top and got toner on the mirror
i had to remove the scanner
it was easy
randy