Hi All...
Was wondering if someone could help me diagnose a problem I'm having with a 4500G switch. I'm trying to get a third party application ( OpUtils ) to monitor one of my 4500G switches through SNMP.
Currently I'm having a hard time getting the Bridge-MIB to report back MAC Addresses that are attached to the switch. OpUtils can see what switch ports are up / down, but that seems to be about it.
I'm not sure if it matters or not, but I have the switch doing MAC address authentication on ports 1 - 37. Its doing RADIUS authentication against an IAS server. MAC addresses are in AD.
I greatly appreciate anyone who can give me some information on the best way to trouble shoot this
Was wondering if someone could help me diagnose a problem I'm having with a 4500G switch. I'm trying to get a third party application ( OpUtils ) to monitor one of my 4500G switches through SNMP.
Currently I'm having a hard time getting the Bridge-MIB to report back MAC Addresses that are attached to the switch. OpUtils can see what switch ports are up / down, but that seems to be about it.
I'm not sure if it matters or not, but I have the switch doing MAC address authentication on ports 1 - 37. Its doing RADIUS authentication against an IAS server. MAC addresses are in AD.
I greatly appreciate anyone who can give me some information on the best way to trouble shoot this