Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
4240n Tray Setup
- Thread starter jmainland
- Start date
- Moderator
- #2
Yes.
You would install two copies of the printer driver, and share them with different names (i.e. HP4240 and HP4240-3, for tray 3)
Both printer drivers would, of course, point to the same physical port or IP address.
In the defaults for the printer drivers, you can tell it which tray to print from.
If you don't want the first one to *EVER* print from Tray 3, then you would not tell it that tray 3 is installed in the device settings.
Just my 2¢
-Cole's Law: Shredded cabbage
--Greg
You would install two copies of the printer driver, and share them with different names (i.e. HP4240 and HP4240-3, for tray 3)
Both printer drivers would, of course, point to the same physical port or IP address.
In the defaults for the printer drivers, you can tell it which tray to print from.
If you don't want the first one to *EVER* print from Tray 3, then you would not tell it that tray 3 is installed in the device settings.
Just my 2¢
-Cole's Law: Shredded cabbage
--Greg
- Status
Similar threads
- Locked
- Question