Hi everyone, I am getting ready to upgrade my first 406V2 to a R6. Any insight or advice is appreciated. I know I will need to do a step Upgrade and modify my ARS, but I just dont want to over look anything. I am worried about currupting my config.... Thank you in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
406V2 R3.1 Upgrade to R6 Advise
- Thread starter MrLuis
- Start date
Be sure it can handle 4.x and higher (PCS level 8 or 8 digits freemem)
Upgrade license, small or normal (small is 32 extensions max and no modules)
With a big step like that i would reprogram is instead of upgrade the config.
ACSS-sarcaSME
Homo sapiens non urinat in ventum
honey, i fried the IP Office !!!
Upgrade license, small or normal (small is 32 extensions max and no modules)
With a big step like that i would reprogram is instead of upgrade the config.
ACSS-sarcaSME
Homo sapiens non urinat in ventum
honey, i fried the IP Office !!!
- Status
Similar threads
