406-replacing due to memory-what to do about 30DSv1?

[AZJeepGirl]

Hi folks,
I have a client who wants to go to 4.1. I already know I need to swap the 406 due to memory. Will a 30DSv1 work with this? They also have the 16DSv1 & an ATM16v1. I have seached everywhere I can think of & there doesn't seem to be a PCN for these out there. My distruibuter & my ACM are both "non-helpful" to say the least.

TIA!

ACA - Implement IP Office
ACS - Implement IP Office
____________________________________
I'd rather be jeepin'! 0|||||||0

 

[tlpeter]

They do work, you do not need to replace them


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[amriddle01]

Just make sure when you upgrade you step the units through the 3.2.999 loader. Or you will get strange issues especially with DTMF.

ACS - IP Office Implement

 

[tlpeter]

This is only for DS30v2 not for the DS30v1 !!!


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[AZJeepGirl]

Thanks guys! I just wanted to make sure before I did all of this and had issues!

ACA - Implement IP Office
ACS - Implement IP Office
____________________________________
I'd rather be jeepin'! 0|||||||0

 

[tlpeter]

You can find this in techbulletin 80 wiich is for 4.0


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!