Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

4 Port FXO Question and Outgoing Calls 1

Status
Not open for further replies.

explosivo

IS-IT--Management
Feb 9, 2001
16
US
I have a cisco 2801 router, configured as H.323 Gateway with a 4 Port FXO for incoming and outgoing calls. I have published the telephone number on the 0/0/0 port. Lets say it is 956-856-9856.

So my questions are:

How can I make the other FXO ports say the published number that is on FXO port 0/0/0 when someone calls out?

Can I make changes for the other voice ports on the router to accomplish this?

Thanks!
 
You can't change the outgoing number on an analog port from inside the router. The ougoing CallerID is handled by the local carrier. However you can have the carrier put the same CallerId number on lines at the serving office. The actual numbers may be 956-856-9801, 956-856-9802 or whatever but the provider can put them in a group with the same 956-856-9856 appearing on outgoing calls from all lines.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top