3rd party Sip Registration on SV8300

[cnyamukondiwa]

Good day,
I am having a challenge in having the third party Ip phone to register.
I have a combination of DT7xx and baseline pro-sip.
The DT7xx can register,but the baseline pro-sip are failing
The license for 3rd party sip is available.
Can anyoneone assist, if there is any configs that need to be done.
Regards,
Cleophas

 

[belevedere]

Programming example
CM 1001>0016>EEC000 Assign the SIP converter number to the Virtual Port number for SIP station
CM 1004>000>3500 Assign the SIP station number
CM 1D14>3500>0 Set the SIP station to PHS
CM 1D15>3500>05 Set the terminal type to IP single line SIP
CM 1202>3500>XX Set the SIP station to an unused Service restriction class
CM 15123>XX> 0 Specify Calling Name Display-IP Single Line is allowed
CM 2B00>3500>1234 Assign password to the SIP station

The default port is 5070.

 

[cnyamukondiwa]

Hi Belevedere,
Thanks for the response.
Let me give a try and will get back to you.
Regards,
Cleophas

 

[cnyamukondiwa]

Hi Belevedere,
Thanks for the assistance.
I have managed to get the phone to register, and it internal dial tone.
It displays the extension number.
The challenge that i now have is that ,when I ring the phone,
it goes to no service and after a while it comes back on
When I try to dial another station,it reflects busy then it gives busy tone
Regards,
Cleophas

 

[cnyamukondiwa]

Hi Belevedere,
May you please clarify something for me.
Lets say I have got 70 3rd party standard IP phones,do I assign 70 EECXXX converters,meaning 1 for each phone
How do you match the virtual port number and EECXXX converter?
Thanking you in advance.
Regards,
Cleophas.

 

[belevedere]

Yes you need a one for one set up. It's very similar to how NEC did wireless phones, and some of the commands are the same.

 

[cnyamukondiwa]

Hi Belevedere,
Thanks for the feedback, let me try it and I will come back to you
Regards,
Cleophas

 

[cnyamukondiwa]

Good Day,
I am still having a challenge with the Baseline Pro-Sip phone to register on SV8300.
I tested the phone on SV8100 and it registers straight away and can receive and dial other extensions.
I have done the configurations as given above, but still I am having the same problem
Attached is the system backup file for Dual CPU for analysis.
Thanking you in advance.
Regards,
Cleophas

 

[neax]

I checked your database, all looks find except for:

1D32-4200-02 (mine is left at default 15, not 02)

Also, make sure:

F88>010:VoIP Channels :0016/0016- (having at least 16 channels licenses for the VoIP)
F88>024:STD SIP Phone :0002/0002- (having at least 1 STD SIP license available)
F88>012:IP Ports :0011/0032- (having at least 1 IP station license available)

NOTE 2: Simultaneous call by three Standard SIP station are available per SIP converter.

 

[cnyamukondiwa]

Good day Neax,

Thanks so much for the information.Will Try to change it.

Regards,

Cleophas

 

[cnyamukondiwa]

Good Day,
I managed to get 3rd party sip phones to register.
Thanks everyone for all your help.
Regards,
Cleophas