3RD PARTY SIP ON NEC SV8100 1

[ReginaldJ]

HI EVERYONE!!

CAN YOU PLEASE HELP ME WITH A PROBLEM ON 3RD PARTY SIP.
LICENSE ON SV8100 - (IP TRUNKS 12 - IP BASIC 13 - IP ADVANCED 4)
I HAVE 10 NEC IP PHONES + 3 GIGASET A510IP CORDLESS PHONES + 1 GRANDSTREAM IP TO ANALOG CONVERTER FOR A PA INTERFACE.
THE 10 NEC PHONES + GRANDSTREAM + 1 CORDLESS IS WORKING.
AS SOON AS I TRY TO LOG ANOTHER CORDLESS ON, IT WILL REGISTER THE NEW CORDLESS, BUT DEREGISTER THE WORKING GIGASET.IN 15-05 IT WILL SHOW ME THE PORT WITH IP 0.0.0.0.
IN TOTAL THE SYSTEM JUST GIVES ME 12 WORKING IP PHONES.
ANY SUGGESTIONS!!!!!!

THANKS NICO

 

[OzzieGeorge]

DONT SHOUT!!!

Sounds like you don't have enough licenses!

 

[bjsvec]

What is needed to set up a third party SIP device?

Must have an IP Terminal Advance license (5111) for each third party device
Third party SIP devices register to UDP port 5070
Register to the IP address in program 10-12-09
Also make sure the extension number that is assigned in 11-02 is within port limitation.

teamonesolutions.com