I have a 3com812 dsl router (telefonica-spain)
firmware 2.00 installed 1 year ago, but I have installed 2.12 to have some "new" configuration options and the router
does not work properly,
adsl status led --> working (green)
Power led --> working (green)
and lan status leds (ethernet cards) works properly.
But I can´t access via rs232 using hyperterminal or the web interface,
I tried to upload new firmware using pcsdl tool on DOS, but
program says... establishing comunication, and does anything.
How can I repair that to work with the router?
firmware 2.00 installed 1 year ago, but I have installed 2.12 to have some "new" configuration options and the router
does not work properly,
adsl status led --> working (green)
Power led --> working (green)
and lan status leds (ethernet cards) works properly.
But I can´t access via rs232 using hyperterminal or the web interface,
I tried to upload new firmware using pcsdl tool on DOS, but
program says... establishing comunication, and does anything.
How can I repair that to work with the router?