Hi,
I have 3c8227C SuperStack II NETBuilde router. I have two active WAN uplinks, one on V.35(A) port and other RS-449(B). I have just one IP subnet (mask 255.255.255.240) and I want to route internet traffic from 6 workstations via uplinka A, and the rest should use B uplink. I can only have one default gateway. Basically, I want inbound traffic from 6 host to be routed via uplink A, and rest to be routed via uplink B. IS it possible on 3com routers? On Nortel and Cisco I can do it very easy nad very quickly.
Thanks,
Brat
I have 3c8227C SuperStack II NETBuilde router. I have two active WAN uplinks, one on V.35(A) port and other RS-449(B). I have just one IP subnet (mask 255.255.255.240) and I want to route internet traffic from 6 workstations via uplinka A, and the rest should use B uplink. I can only have one default gateway. Basically, I want inbound traffic from 6 host to be routed via uplink A, and rest to be routed via uplink B. IS it possible on 3com routers? On Nortel and Cisco I can do it very easy nad very quickly.
Thanks,
Brat