Two problems here, be very grateful for advice.
VPN in using Safenet soft PK client. Authenticates fine.
Then you can only see one device on the network, cannot access any other devices even on the same subnet.
Firewall external: 217.207.128.106
Internal: 172.20.1.100
Accessible server: 172.20.1.2 / 192.168.16.3
Other devices on 172.20.1 subnet
All servers / Pc's / firewall plugged directly into switch.
172.20.1.2 has ISA2000 running which is where i suspect the problem is..There is no reference to connecting to this server in the firewall config.
Any suggestions?
Second problem: Trying to VPN in from XP client using 3com vpn utility. The settings are correct but the utility just says VPN status unknown.
I had the safenet client installed but when i uninstalled it, it blew the TCPIP stack and I had to go to a restore point - The software appears to be uninstalled but there are some registry entries left - could this be blowing the 3com utility out?
Very grateful for any suggestions.
Steve M
VPN in using Safenet soft PK client. Authenticates fine.
Then you can only see one device on the network, cannot access any other devices even on the same subnet.
Firewall external: 217.207.128.106
Internal: 172.20.1.100
Accessible server: 172.20.1.2 / 192.168.16.3
Other devices on 172.20.1 subnet
All servers / Pc's / firewall plugged directly into switch.
172.20.1.2 has ISA2000 running which is where i suspect the problem is..There is no reference to connecting to this server in the firewall config.
Any suggestions?
Second problem: Trying to VPN in from XP client using 3com vpn utility. The settings are correct but the utility just says VPN status unknown.
I had the safenet client installed but when i uninstalled it, it blew the TCPIP stack and I had to go to a restore point - The software appears to be uninstalled but there are some registry entries left - could this be blowing the 3com utility out?
Very grateful for any suggestions.
Steve M