Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
3Com 3300 & Imagecast
- Thread starter Micro2002
- Start date
TimRegester
Technical User
I have used a 3300 with multicast Ghost and 1 PCs and it worked fine so I doubt it is the hardware.
Have you set up the multicast options on the switch, if you don't it will send the image as a broadcast since it will not be able to ascertain which PCs need the multicast service. This will be found under Bridge multicastfiltering on the cli
I hope this helps.
Have you set up the multicast options on the switch, if you don't it will send the image as a broadcast since it will not be able to ascertain which PCs need the multicast service. This will be found under Bridge multicastfiltering on the cli
I hope this helps.
- Status
Similar threads
- Locked
- Question
- Locked
- Question