Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3903 fdlu error

Status
Not open for further replies.

wcmash

IS-IT--Management
Oct 13, 2006
83
US
I am trying to update the firmware on a M3903 and I keep getting this error. I have updated a few of them today with no problem but this one won't work.


this is the error SDL2110 REASON 20, 3903(0 1 4 9 ), VERSION 91, MAINT MODE.


This is the fwvu info for the phone.

****M3900 VERSION REPORT****
TERMINAL TYPE = 019
CORE FIRMWARE VERSION = 017
FLASH FIRMWARE VERSION = 052

Thanks for your help in advance.
 
It might be worth checking that the set type is actually a 3903 phone and not another type as I've known many failures to be caused when users swap out phones thinking that they will work on all digital sockets.

You might need to try out the following tips below

Use the suspend command to access LD 32, use FDLC to cancel the suspended command, disable & enable the affected card and re-commence with another FDLU.

##################################################

ACTIONS TAKEN TO TRY TO RECOVER SETS:

1. FDLF L S C U
2. UP PLUGING THE SET, RE PLUGING THE SET, THE FDLF L S C U
3. DISU L S C U, ENLU L S C U THEN FDLF L S C U

ANY OF THE ABOVE EXAMPLES, THE SYSTEM OUTPUT ' UNIT IS IN PROCESS OF A DOWNLOAD.'

##################################################

Trying to do CHG on M3904 TNB get SCH1958 : TN is blocked since midnight download is triggered for the Taurus set type.
Tried to DISU TNB got NPR034 : DISU command is blocked because the unit being disabled is experiencing a flash download.
Tried FDLU TNB said already had latest Firmware.
FDLF TNB and now able to CHG or DISU OK








Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
The only time i ever update a 3900 is if i can physically sit next to the thing. A few times someone saw the red light on and the bar going across the screen. And guess what they thought. "I must unplug this phone right now"
 
Reason 20- Verification byte is incorrect.

I have no idea what that means but it doesn't like something about that phone or TN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top