Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3845 CME can't add ephone

Status
Not open for further replies.

LCIS

Technical User
Oct 9, 2005
35
CA
After I flashed my router for 12.4 24 T3 I can't create more than 63 ephone (7940-7941). I had 12.4 12.T4 and it was working fine. I has reading on the net about it and the only thing I found was about a bug, a leak memory.
I didnt change anything on my config, my telephony-services is at max-dn 100 and max-ephone 100, what can i do. now everytime i tryed to had an ephone i receive this error, can't create peer... but if i delete one i can create another one...

Thanks

LCIS TECH
LAND COMMUNICATION INFORMATION SYSTEM
DND
 
Are you doing this from CLI or the web interface?
Sounds like you are doing it from the CLI but making sure.
Are you out of memory by any chance?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top