3750 to HP 2510g etherchannel-trunk

[kmcquillan]

Can a Cisco 3750-12 and a HP 2510g have link Aggregation setup between the two? I have tried many times to set it up and one of the ports disables itself on the Cisco due to errors.

Thanks in advance

 

[PScottC]

Not Etherchannel per-se... That's Cisco proprietary. You can do 802.3ad (aka LACP). When you build your channel-group on the cisco switch you choose "active" mode. For example:

int range gi1/0/1 - 2
channel-group 1 mode active

Since this is a switch to switch link, you will want to enable trunking also...

int range gi1/0/1 - 2, po1
switchport trunk encapsulation dot1q
switchport mode trunk

PSC
[—] CCNP_{[blue]x3[/blue]} (Security/R&S/Wireless) [•] MCITP: Enterprise Admin [•] MCSE [—]

Governments and corporations need people like you and me. We are samurai. The keyboard cowboys. And all those other people out there who have no idea what's going on are the cattle. Mooo! --from "Hackers