I'm trying to connect to a remote router over an BRI interface. When I ping the remote router the call comes up but fails. below is th debug output. Can anyone tell me what it means?
Thanks for any help received.
Bob
router#
2d22h: BR2/1 DDR: rotor dialout [priority]
2d22h: BR2/1 DDR: Dialing cause ip (s=192.100.101.56, d=192.6.14.134)
2d22h: BR2/1 DDR: Attempting to dial nnnnnnnnnnnnnn
2d22h: ISDN BR2/1: TX -> SETUP pd = 8 callref = 0x0E
2d22h: Bearer Capability i = 0x8890
2d22h: Channel ID i = 0x83
2d22h: Called Party Number i = 0x80, 'nnnnnnnnnnnnnn', Plan:Unknown, Type:Unknown
2d22h: ISDN BR2/1: RX <- SETUP_ACK pd = 8 callref = 0x8E
2d22h: Channel ID i = 0x89
2d22h: Progress Ind i = 0x8288 - In-band info or appropriate now available
2d22h: ISDN BR2/1: RX <- ALERTING pd = 8 callref = 0x8E
2d22h: ISDN BR2/1: RX <- CONNECT pd = 8 callref = 0x8E
2d22h: ISDN BR2/1: HOST_CONNECT: VOICE ERROR: NULL VDEV Common(0xFC): bchan 0, call id 0x8012
2d22h: ISDN BR2/1: TX -> CONNECT_ACK pd = 8 callref = 0x0E
router#
2d22h: BRI2/1: wait for isdn carrier timeout, call id=0x8012
2d22h: ISDN BR2/1: TX -> DISCONNECT pd = 8 callref = 0x0E
2d22h: Cause i = 0x8090 - Normal call clearing
2d22h: ISDN BR2/1: RX <- RELEASE pd = 8 callref = 0x8E
2d22h: ISDN BR2/1: TX -> RELEASE_COMP pd = 8 callref = 0x0E
router#
Thanks for any help received.
Bob
router#
2d22h: BR2/1 DDR: rotor dialout [priority]
2d22h: BR2/1 DDR: Dialing cause ip (s=192.100.101.56, d=192.6.14.134)
2d22h: BR2/1 DDR: Attempting to dial nnnnnnnnnnnnnn
2d22h: ISDN BR2/1: TX -> SETUP pd = 8 callref = 0x0E
2d22h: Bearer Capability i = 0x8890
2d22h: Channel ID i = 0x83
2d22h: Called Party Number i = 0x80, 'nnnnnnnnnnnnnn', Plan:Unknown, Type:Unknown
2d22h: ISDN BR2/1: RX <- SETUP_ACK pd = 8 callref = 0x8E
2d22h: Channel ID i = 0x89
2d22h: Progress Ind i = 0x8288 - In-band info or appropriate now available
2d22h: ISDN BR2/1: RX <- ALERTING pd = 8 callref = 0x8E
2d22h: ISDN BR2/1: RX <- CONNECT pd = 8 callref = 0x8E
2d22h: ISDN BR2/1: HOST_CONNECT: VOICE ERROR: NULL VDEV Common(0xFC): bchan 0, call id 0x8012
2d22h: ISDN BR2/1: TX -> CONNECT_ACK pd = 8 callref = 0x0E
router#
2d22h: BRI2/1: wait for isdn carrier timeout, call id=0x8012
2d22h: ISDN BR2/1: TX -> DISCONNECT pd = 8 callref = 0x0E
2d22h: Cause i = 0x8090 - Normal call clearing
2d22h: ISDN BR2/1: RX <- RELEASE pd = 8 callref = 0x8E
2d22h: ISDN BR2/1: TX -> RELEASE_COMP pd = 8 callref = 0x0E
router#