3620 troubles

[bbears]

Got a 3620 that only boots up in rommon. Taking a look at dir flash: it has a flash but with a bad checksum. Tried to xmodem a new flash to it but receive an error that there is not enough memory. Is there a way to force the erase of the bad checksum flash that is written from the rommon mode. Thanks

 

[Minue]

Hello
Did you resolve your problem?In any case you can try to restore via tftp download or Xmodem with a different syntax.

http://articles.techrepublic.com.com/5100-1035_11-5623025-2.html

http://www.cisco.com/warp/public/130/xmodem_generic.html

Regards

 

[bbears]

Finally got it going. The flash would not erase using tftp or xmodem. Loaded the new flash on a pcmcia card and booted of that. Once it booted off the pcmcia card I was able to erase the flash and do a copy to it.

 

[Minue]

That's interesting.Never did play around with the 3600,didn't know they were so strange.

Regards