Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

355A vs. 355AF operator error

Status
Not open for further replies.

bigbee67

IS-IT--Management
Feb 23, 2008
8
US
As I open the package of the 355A I just bought, it occurs to me what the "F" stands for. What is the easiest way to hook a 355A to an AT modem cable?

I am upgrading from a VS1 to an R7 messaging module and want to connect to it.

Have a great holiday!
 
You only use the rs232 port to change the IP address. All the programming is done thru the line port.The default is
10.0.0.42
 
All the programming is done thru the line port"

Sorry that should read LAN port.

 
Use a gender changer to convert from the 355A to a 355 AF, then a DB25 to DB9 converter. It's a little clumsy, but it'll work fine. But you still have to hook up to it via ethernet to grab system data.
 
If you don't plan on changing the IP address then let it be and use the LAN port, it is soooooo much nicer then the RS232 interface but doesn't give you any options for changing the IP address on the unit and no troubleshooting but otherwise it is far superior to it. Customers love it because they can finally use the GUI and change names themselves without straining their brain due to the double digit dialing per letter.

Joe W.

FHandw., ACA, ACS

If you can't be good, be good at it!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top