Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3300 Firmware Upgrade

Status
Not open for further replies.
cdove

cdove

MIS
Mar 20, 2002
153
0
0
GB
What is the best way to upgrade the Firmware on a 3300 Switch and do the cables need to be unplugged when doing the upgrade?

Thanks

Chris
 
Sort by date Sort by votes
If you've setup a TCPIP Address for Management on the Switch, you can use any standard TFTP Server to push the Firmware to the Switches.

If not, you will have to carry around a laptop (or any computer) and connect to each switch through the Console Port and complete the update that way!

Good Luck!
 
Upvote 0 Downvote
why would it be necessary to upgrade firmware to the switch?
and do I need to be connected vis the console prot to do this?
 
Upvote 0 Downvote
Try 3com network supervisor. It has a time limited add on which you can use to scan the network and find any firmware out of date. You can then push the firmware to all the switches over the network
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AH64Armament
  • Locked
  • Question
Firmware push
Replies
1
Views
49
VinceWhirlwind
VinceWhirlwind
MrHanMan
  • Locked
  • Question
3com Intellijack NJ240FX firmware
Replies
3
Views
30
cabrower
cabrower
mlgmartin
  • Locked
  • Question
Upgrade ProCurve Switch from Version L.10.23 to L.11.24 1
Replies
1
Views
55
VinceWhirlwind
VinceWhirlwind
WonR
  • Locked
  • Question
3Com 4400 : Do I update firmware & DeviceManager?
Replies
0
Views
39
WonR
WonR
PhyscoAustinio
  • Locked
  • Question
Connect 2 HP 2610 Procurves to a Mitel 3300
Replies
13
Views
93
PhyscoAustinio
PhyscoAustinio

Part and Inventory Search

Sponsor

Back
Top