Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3300 CX - analog phone to ring on incoming calls

Status
Not open for further replies.

StardataMitel

Programmer
Jul 7, 2008
48
AU
I have a 3300 CX system that has been set up as a Key System.

Incoming calls ring Hunt Group 9600 which contains the Key System numbers 6001-6004.
All IP Phones have line appearances for the Key System numbers 6001-6004 (labeled as Line 1, 2, 3 & 4) with the reception position ringing straight away and the others set to Delayed Ring.

Is there a way to get an analog extension (cordless phone) to also ring on all incoming calls?

Thanks in advance.
 
Add Keys 6001 to 6004 into ring groups. Add the analogue extension into each ring group and then add the 4 ring groups into the Hunt Group intsead of the 4 keys.

The key and the anlogue will ring at the same time.

Hope that helps.
 
Thanks for that, I thought the same but it doesn't allow me to add the Ring Groups as members for the Hunt Group.
"Members must be Stations or Broadcast Groups." - that's the error I get.
 
Last time I used it I only used one Key and 1 Analogue. Can't think of any other way around it, sorry.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top