tphonedude
Vendor
does anyone have the dip switch settings and prog string for
for the us robotics 33.6 modem to connect to mer-mail
for the us robotics 33.6 modem to connect to mer-mail
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
33.6 us robotics modem prog for mer mail
- Thread starter tphonedude
- Start date
- Status
techman3030
MIS
power OFF and Set 1,3,7,8 down everything else up then power up and type in the following commands at the Correct speed setting 2400 or 9600, which ever your mail terminal is set to.
AT&F0 <enter> you will see OK
ATS0=1 <enter> OK
AT&B1 <enter> OK
ATY0 <enter> OK
ATQ1 <enter> no response after this command
AT&W0 <enter>
AT&W1 <enter>
power off. set switches 1,4,8 down. all other switches should be up, and your ready to roll
AT&F0 <enter> you will see OK
ATS0=1 <enter> OK
AT&B1 <enter> OK
ATY0 <enter> OK
ATQ1 <enter> no response after this command
AT&W0 <enter>
AT&W1 <enter>
power off. set switches 1,4,8 down. all other switches should be up, and your ready to roll
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question