323h trunks dropping calls on 3.6

[jmilla]

I have several site that have cisco routers to norstars via ti trunks. When I dial from a BCM 3.5 the calls complete but on 3.6 some of the calls drop after 2 seconds. Does anyone know what might be the difference between 3.5 and 3.6 h323 trunks that is causing this problem?

 

[3Sixty]

What patches have you applied on the BCM 3.6?

There is a few for those sort of problems.

Marshall

 

[jmilla]

I have installed feps 37.90.0.33t.38. It seemed to help one of the 3.6. but the others are still dropping some calls.

 

[jmilla]

Is there any way to remove patch and then re-install it?

 

[3Sixty]

There a few more other patche for IP problems I would look and see if you can apply these patches.

Marshall

I forgot to ask do you know how to check what patches have been applied.

 

[jmilla]

yes, that is the only one installed.

 

[redcomet]

disable "h323_fixup" on the cisco components and install the patch "BCM_360.170_FEPS.33.371300.exe"

this will help. i know it cause i had exactly the same problem