Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3.7 question

Status
Not open for further replies.

jsaad

IS-IT--Management
Jun 20, 2002
1,386
1
38
US
I have a well maintained 3.7 system with 48 sets and a PRI. Customer wants to network this system via VPN to another BCM 50 R6 . Is that possible with a 400 3.7? Would I need SIP Gateway or VOIP Gateway keycode and MCDN?
 
H323 is available on the 3.7, but I don't see SIP gateways as an available keycode until 4.0, unless my list is incomplete. MCDN/Q.SIG is only required for centralized voicemail. If they just want to make private calls between the systems then only VOIP trunks would be required.

Brian Cox
Georgia Telephone
 
One system is 3 digit, the other 4 digit extensions. Would that have to change?

The 3 digit system has target lines with 4 rec'd digits. I'm trying to avoid a complete reprogramming of either system.
 
I think that the private target lines for each system will need to have one assigned to each extension number to allow incoming calls to get through.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top