2nd line 1

[jpereirv135]

Hi, anyone knows which is the command to enable the second line in a DigiTal ericsson phone (dialog 4222)?


Thanks in advance!!

 

[jpereirv135]

I think I found it....

Could be using FOL2?

 

[kank]

You must define a function key which is ODN2. When you press this it enables second line. Use the command KSFKCIR=xxxx,KEY=xx,FCN=ODN2;

 

[jpereirv135]

Thanks kank, I apreciated your reply , but i have another doubt.

Could I configure The odn2 in any button?
Here is the pbx configuration.------------------>

DIR = 32913

KEY KTYPE VALUE DIG

00 PGM
01 FCN TNS 32915
02 MNS 36350 36350
03 FCN ODN2
04 SKI F1
05 SKI F2
06 SKI F3
07 SKI F4
08 SKI MENU
09 ODN 32913
10 ODN 32913
11 ODN 32913
13 FCN TNS
14 FCN TNS 36014
15 FCN TNS
16 FCN TNS
17 FCN TNS
18 FCN TNS
19 FCN TNS
20 FCN TNS
21 FCN TNS
22 FCN TNS
23 FCN TNS

 

[kank]

first of all the print out you send is not for 4222. 4222 has less keys. Also on key 3 you have the ODN2 already defined. I advice you to correct the instrument type first (KSCACIR=32913,ITYPE=26. The 3rd button from top on the right raw will be ODN2.