Migrating a database from a SX2K to MN3300 fails using the Software Installer tool. I first installed 10.0.1.22 on the MN3300, and then used the SI tool to migrate the SX2K datasave from OPSMAN. The SX2K is running 34.2.7.4.
I also used the SI tool to reinstall 10.0.1.22 and migrate the DB at the same time and it failed.
I have successfully migrated many other systems using the same procedure.
The SX2K has no NSUs but has ACD enabled.
Any help is greatly apreciated
The log from the MN3300 reads :
UPR_STATUS_EXTERNAL_ACTION_IN_PROGRESS
UPR_STATUS_EXTERNAL_ACTION_COMPLETE
The Upgrade Manager startUpgrade has succeeded!!
restore failure return false
restore has succeeded - reason -
************************************************
************************************************
************************************************
************************************************
************************************************
POLLING for restore completion............
The Restore has failed - reason - No error set
The restore has failed
ProcessState failed for Restore
deleting file /sysro/install/install.old
/sysro/install: S_dosFsLib_FILE_NOT_FOUND
moving file /sysro/install/install.log -> /sysro/install/install.old
deleting file /sysro/install/3300Upgrade_State.old
/sysro/install: S_dosFsLib_FILE_NOT_FOUND
moving file /sysro/install/3300Upgrade_State.txt -> /sysro/install/3300Upgrade_State.old
deleting file /inactive/sysro/install/install.old
moving file /inactive/sysro/install/install.log -> /inactive/sysro/install/install.old
deleting file /inactive/sysro/install/3300Upgrade_State.old
/inactive/sysro/install: S_dosFsLib_FILE_NOT_FOUND
moving file /inactive/sysro/install/3300Upgrade_State.txt -> /inactive/sysro/install/3300Upgrade_State.old
Failed to communicate with VM provider - 19
_Upgrade_Cfe:
!!! WARNING: System restart may occur !!!
_Upgrade_Cfe: BCM image /sysro/mxe_bcm_cfe.bin
_Upgrade_Cfe: comparing 223064 bytes in BCM CFE images...
_Upgrade_Cfe: BCM CFE images same - no upgrade required
I also used the SI tool to reinstall 10.0.1.22 and migrate the DB at the same time and it failed.
I have successfully migrated many other systems using the same procedure.
The SX2K has no NSUs but has ACD enabled.
Any help is greatly apreciated
The log from the MN3300 reads :
UPR_STATUS_EXTERNAL_ACTION_IN_PROGRESS
UPR_STATUS_EXTERNAL_ACTION_COMPLETE
The Upgrade Manager startUpgrade has succeeded!!
restore failure return false
restore has succeeded - reason -
************************************************
************************************************
************************************************
************************************************
************************************************
POLLING for restore completion............
The Restore has failed - reason - No error set
The restore has failed
ProcessState failed for Restore
deleting file /sysro/install/install.old
/sysro/install: S_dosFsLib_FILE_NOT_FOUND
moving file /sysro/install/install.log -> /sysro/install/install.old
deleting file /sysro/install/3300Upgrade_State.old
/sysro/install: S_dosFsLib_FILE_NOT_FOUND
moving file /sysro/install/3300Upgrade_State.txt -> /sysro/install/3300Upgrade_State.old
deleting file /inactive/sysro/install/install.old
moving file /inactive/sysro/install/install.log -> /inactive/sysro/install/install.old
deleting file /inactive/sysro/install/3300Upgrade_State.old
/inactive/sysro/install: S_dosFsLib_FILE_NOT_FOUND
moving file /inactive/sysro/install/3300Upgrade_State.txt -> /inactive/sysro/install/3300Upgrade_State.old
Failed to communicate with VM provider - 19
_Upgrade_Cfe:
!!! WARNING: System restart may occur !!!
_Upgrade_Cfe: BCM image /sysro/mxe_bcm_cfe.bin
_Upgrade_Cfe: comparing 223064 bytes in BCM CFE images...
_Upgrade_Cfe: BCM CFE images same - no upgrade required
