Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2_1 Software

Status
Not open for further replies.

Shine52

Vendor
Nov 10, 2005
181
US
Anyone know where I can find 2_1 software. Trying to upgrade a 412 unit that is 2_0_16. Avava support points you to 3_0_65 when looking up 2_1 software. Tried to upgrade it w/ 3_0_65, and crashed the unit. Thanks in advance.

Figure it out damn-it!
 
So I can't figure out how to move past the following:

Programming FPGA ...
FPGA Version 02.00
FPGA Eng Version 33

P4 Loader 1.32 (8MB-4x29LV160 Flash-120nS, Main SDRAM 32MB, Local SDRAM 16MB)
MPC8260 CPU Revision 0x0024

I've done the AT commands, and the drbug, still brings me to the same place. Any help?

Figure it out damn-it!
 
When it shows Prgramming FPGA and not go any further then it has no software on it and it is polling for it.
You must now open the 3.0.65 manager and go to tftp log to see what it is doing.
This will show a mac address and an ipaddress where it is looking for.


BAZINGA!

I'm not insane, my mother had me tested!
 
Shows below, now what? Thanks.

Tue 1/11/2011 16:01:50 : Received BOOTP request for 0003ff62808d 0.0.0.0 , unable to process



Figure it out damn-it!
 
Anyone know what this means: It's the only thing my DTE port is displaying.

Received BOOTP Response :C0.A8.2A.09

Figure it out damn-it!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top