Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2948g failed to set port channel on

Status
Not open for further replies.
Dec 9, 2008
68
US
I keep getting the following error

Console> (enable) set port channel 2/2
Illegal port_list range.
Failed to set port(s) 2/2 channel mode to on.
Console> (enable) set port channel 2/2 mode on
Usage: set port channel <port_list> [on|off|desirable|auto]
(example of port_list: 2/1-4 or 2/1-2 or 2/5,2/6)
Console> (enable) set port channel 2/1-4
Mismatch in port speed.
Mismatch in port duplex.
Mismatch in port speed.
Mismatch in port duplex.
Mismatch in port speed.
Mismatch in port duplex.
Failed to set port(s) 2/1-4 channel mode to on
 
Your first problem is due to you only nominating one interface - a portchannel by definition needs at least two interfaces in it.

Your second problem is pretty self-explanatory - you can't portchannel a bunch of ports unless they are configured the same.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top